![]() I don't like the whole clear coat look to a cab. Plus, these machines were never intended to look more shiny than my brand new $50,000 car. it dries a lot faster, less bleed around stencils etc. I like to use semi gloss wherever possible. I'd let that sit for 24 hours & do 2nd color. Do 3rd semi heavy, but not crazy heavy final coat to give good overall colorization & surface finish to the paint. Strip it down to bare wood again, skip the primer, do your base Yellow, go light for 1st 2 coats both to avoid runs & to let it "soak" into wood. It's gotta be your primer causing the issue. I just did Nitro in 3-4 om start to finish. ![]() Only time I have had anything near that happen, it was on wobdrails for the PF, it was too thick of a 2nd coat, IMO it's the thinners in the second color attacking the base coat. I spray the base & allow 24 hours to set & then do my 1st color, then another 24 hour, the 3rd color goes onto of that. Playboy was 2X Semi gloss white base, Rustoleum Satin Magenta, & then 2X Semi gloss black.Īll 3 were done with same lead times. Semi gloss white bases, no primer on base, & then 2X Apple red gloss on Nitro, with 2X Semi gloss black, on SBM I did Rustoleum 2X semi gloss white, Valspar "pool party" for blue, & 2X semigloss black. I did all three of these with Rustoleum, & mostly 2X. I told them that detail should be on the can.Ĭrazy. Also if you wait more than an hour to do a coat you’ll get the peel. These spray paints apply easily, provide excellent coverage and dry fast. If you just saturate the whole area and try to cover it all in one pass it’ll cause the “orange peeling” you see in the pic on a follow up coat. Rust-Oleum® Painter’s Touch® 2X Ultra Cover® satin finish spray paints provide long-lasting protection and durability. Wait another 5 mins or so and then do it again diagonally. I asked about that is considered coats and what exactly is the time to wait between applying and they said to spray an EXTREMELY light layer back and forth to cover the area WAIT ABOUT 3-5 mins then go up and down with about the same consistency. One thing for anyone doing this for the first time having similar issues. I’m just not having good luck at all with it and have never done this before it’s an expensive and agitating learning experience. I picked it because so many of you have posted projects that have turned out so nice using the 2X. ![]() Yeah I know what you mean about when it’s done. ![]() Had to take them to bare wood without messing up the white. The dark blue bands had to be repainted twice. If it makes you feel better here is an after pic. ![]()
0 Comments
Leave a Reply. |